Xpert SARS-CoV-2 Control Panel M430

(3 reviews) Write a Review
SKU:
M430
Size:
6 x 300 µL
DataSheet:
Download PDF
  • Xpert SARS-CoV-2 Control Panel M430
  • Cepheid GeneXpert®
Select Currency //329.00

 Select your currency from the header

Description

MMQCI Xpert SARS-CoV-2 Control Panel M430 Part Number: M430

Kit Contains: 6 tubes x 300µL

3 Positive controls & 3 Negative controls

Xpert SARS-CoV-2 Control Panel M430 DataSheet

INTENDED USE:

The Xpert SARS-CoV-2 Control Panel M430 is intended for use as an external positive and negative quality control to monitor the performance of in vitro laboratory nucleic acid testing procedures for the qualitative detection of SARS-CoV-2 by the Xpert® Xpress SARS-CoV-2 assay on the GeneXpert® DX, GeneXpert Infinity and GeneXpert Xpress systems (Cepheid®).

PRODUCT SUMMARY and PRINCIPLE:

The Xpert SARS-CoV-2 Control Panel M430 is composed of 2 controls, Xpert SARS-CoV-2 Positive and Xpert SARS-CoV-2 Negative. Xpert SARS-CoV-2 Positive contains surrogate control material composed of synthetic RNA corresponding to genome segments of the SARS-CoV-2 pathogen detected by the Xpert Xpress SARS-CoV-2 assay. The Xpert SARS-CoV-2 Negative contains no RNA.

Routine use of quality controls that are consistent lot to lot assists the laboratory in identifying shifts, trends, and increased frequency of random errors caused by variations in the test system, such as failing reagents. Early investigation can prevent failed assay runs.

COMPOSITION:

The Xpert SARS-CoV-2 Control Panel M430 is comprised of 6 tubes, 3 tubes of Xpert SARS-CoV-2 Positive and 3 tubes of Xpert SARS-CoV-2 Negative, 300µL each. Xpert SARS-CoV-2 Positive control contains synthetic RNA suspended in a non-infectious solution of buffers, preservatives and stabilizers. Xpert SARS- CoV-2 Negative control contains buffers and preservatives. Table 1 lists the expected results when the Xpert SARS-CoV-2 Control Panel M430 is tested with the Xpert Xpress SARS-CoV-2 test on GeneXpert systems.

INSTRUCTIONS FOR USE:

  1. Allow control to be tested to come completely to room temperature (18°–25°C), approximately 30
  2. Use the control as provided. DO NOT DILUTE.
  3. Immediately before use, mix the control thoroughly by rapidly inverting the tube 5 times. Tap the tube several times on the bench to remove any liquid caught in the cap before opening the
  4. Open the GeneXpert cartridge
  5. Using a clean transfer pipette, transfer one draw of the control sample into the large opening (Sample Chamber) in the
  6. Close the GeneXpert cartridge
  7. Continue with the test procedure according to manufacturer’s
  8. Discard after use according to your local and federal

For complete Xpert Xpress SARS-CoV-2 test instructions, refer to the Xpert Xpress SARS-CoV-2 package insert provided by Cepheid.

PRECAUTIONS, WARNINGS and LIMITATIONS:

  • Do not Use the control as provided.
  • This product is intended for in vitro analytical
  • This product does not contain the entire SARS-CoV-2
  • This product is not intended to replace manufacturer controls provided within the
  • Appearance: Positive control is slightly cloudy and Negative control is clear.
  • This product does not contain any biological material of human or animal origin. Universal Precautions are NOT required when handling this product.
  • Quality control materials should be used in accordance with local, state, federal regulations and accreditation
  • Xpert SARS-CoV-2 Control Panel M430 cannot be cloned, sold, or transferred without the explicit written consent of

STORAGE and STABILITY:

The Xpert SARS-CoV-2 Control Panel M430 should be stored frozen (-25°C to -15°C). Unopened Xpert SARS-CoV-2 Control Panel M430 material is stable through the expiration date printed on the kit label when continuously stored frozen. The Xpert SARS- CoV-2 Control Panel M430 components are for single use. Discard after use according to your local and federal regulations.

EXPECTED VALUES:

The laboratory should follow Good Laboratory Practice (GLP) and establish its own performance characteristics for Xpert SARS- CoV-2 Control Panel M430 in demonstrating adequate system performance.

Expected results when controls are analyzed on GeneXpert systems are listed in Table 1.

Table 1. Expected Results of Xpert SARS-CoV-2 Control Panel M430

 Control:

Xpert SARS-CoV-2 Negative

Xpert SARS-CoV-2 Positive

 Test Result:

 SARS-CoV-2 NEGATIVE

 SARS-CoV-2 POSITIVE

 Analyte Result E:

 NEG

 POS

 Analyte Result N2:

 NEG

 POS

ORDERING INFORMATION:

Xpert SARS-CoV-2 Control Panel M430 Part Number: M430

Kit Contains: 6 tubes x 300µL

3 Positive controls & 3 Negative controls

View AllClose

3 Reviews

  • 5
    quick service

    Posted by Waylon on 7th Jan 2022

    Gentaur staff is very friendly. Assist in all the problems very quickly. Must recommend this provider due to its quick service

  • 5
    Controle

    Posted by Jean Moulin on 18th Jun 2021

    Standard de référence pour notre détection de l'ARN du SARS-CoV-2 par RT-PCR dans nos protocoles de qualité pour réaliser un dépistage de masse.

  • 5
    Xpert SARS-CoV-2 Control Panel M430

    Posted by MMQC on 11th Jun 2021

    The Xpert SARS-CoV-2 Control Panel M430 is intended for use as reference material to monitor the performance of in vitro laboratory nucleic acid testing procedures for the qualitative detection of SARS-CoV-2 by the Xpert® Xpress SARS-CoV-2 assay performed on the GeneXpert Systems.

View AllClose