Human CRP SPARCL™ Assay (SALIVA) | CRPS-SP-20

FOR RESEARCH USE ONLY

INTRODUCTION

CRP (C-reactive protein) is an acute phase protein that is synthesized in the liver and secreted into blood. It is a pentamer, comprised of identical 25 kDa subunits. During the acute phase response, as a result of infection, disease or tissue trauma, serum levels can increase >100-fold. It has recently been reported that CRP concentrations also increase in saliva (refs 1 & 2). We offer this kit as a research tool for evaluation of CRP levels in saliva.

PRINCIPLE OF THE ASSAY

The human CRP SPARCL™1 (Spatial Proximity Analyte Reagent Capture Luminescence, ref 3) assay allows measurement of CRP using a single 30-minute incubation that requires no wash steps. The assay uses two different CRP-specific antibodies. One is conjugated to horse radish peroxidase (HRP); the other is conjugated to acridan, a chemiluminescent substrate. When HRP and acridan conjugated CRP antibodies bind to CRP they are brought into close proximity. With the addition of hydrogen peroxide, HRP catalyzes oxidation of proximal acridan molecules causing a flash of chemiluminescence. Acridan conjugated antibodies distant from HRP produce no signal. This principle allows the development of a homogeneous assay that allows rapid determination of CRP concentrations.

The HRP and acridan conjugated antibodies provided with the kit are mixed with standards and diluted samples in wells of the 96- well SPARCL™ plate provided with the kit2. After incubation for 30 minutes on a shaker at 25°C and 150 rpm, the plate is placed into a luminometer. Trigger solution containing hydrogen peroxide is injected into each well and luminescence is immediately measured. The concentration of CRP is proportional to luminescence and is derived from a standard curve.

MATERIALS AND COMPONENTS

Materials provided with the kit:

• Anti-CRP HRP conjugate Store ≤ -70°C

• Anti-CRP acridan conjugate Store ≤ -70°C

• CRP stock Store ≤ -70°C

• Diluent; CSD50-1, 2 x 50 ml

• Trigger solution; TS7-1, 7 ml

• White SPARCL™ plate (12 x 8-well)

• Clear untreated 96-well plate

Materials required but not provided:

• Precision pipettes and tips

• Polypropylene microcentrifuge tubes

• Vortex mixer

• Plate incubator/shaker

• Luminometer capable of simultaneous injection/measurement

• Graphing software

STORAGE

Store the HRP conjugate, acridan conjugate and CRP stock at or below -70°C (they may be stored at -20°Cfor at least two weeks). The remainder of the kit should be stored at 2-8°C. The SPARCL™ plate should be kept in a sealed bag with desiccant and antioxidant.The kit will remain stable for at least six months from the date of purchase, provided that the components are stored appropriately.

GENERAL INSTRUCTIONS

1. Please take the time to completely read all instructions before starting your assay. Contact us if you need clarification.

2. All reagents used in the assay should be allowed to reach room temperature (25°C) before use.

3. It is important that standards and samples be added to the SPARCL™ plate quickly. If testing large numbers of samples, rather than pipetting standards and samples directly into the white SPARCL™ plate using a single channel pipettor, we recommend the following. First, pipette an excess volume of standards and samples into appropriate wells of the clear 96- well plate. Then use an 8- or 12-channel multipipettor to quickly and efficiently transfer 50 ml aliquots to the appropriate wells of the white SPARCL™ plate. The wells of the clear plate hold a maximum volume of 300 ml.

4. Follow the sequence of events below when running the assay.