BioFire RP2.1/RP2.1 plus Control Panel M441 (includes SARS-CoV-2)

(2 reviews) Write a Review
SKU:
M441-OUS
Size:
12 x 300 µL
DataSheet:
Download PDF
Fiche de Produit:
Download PDF
  • BioFire RP2.1 RP2.1 plus Control Panel M441 includes SARS-CoV-2
  • biofire
Select Currency //534.00

 Select your currency from the header

Description

MMQCI BioFire RP2.1/RP2.1plus Control Panel M441
Part Number: M441
Kit Contains:
12 tubes x 300μL
6 Positive controls and 6 Negative controls

BioFire RP2.1/RP2.1 plus Control Panel M441 (includes SARS-CoV-2) English Datasheet

BioFire RP2.1/RP2.1 plus Control Panel M441 (includes SARS-CoV-2) French Datasheet

INTENDED USE:
BioFire® RP2.1/RP2.1plus Control Panel M441 is intended for use as reference material to monitor the performance of in vitro laboratory nucleic acid testing procedures for the qualitative detection of Adenovirus, Coronavirus, Human Metapneumovirus, Human Rhinovirus/ Enterovirus, Influenza A, Influenza A subtype H1, Influenza A subtype H1-2009, Influenza A subtype H3, Influenza B, Middle East Respiratory Syndrome Coronavirus, Parainfluenza Virus, Respiratory Syncytial Virus, Severe Acute Respiratory Syndrome Coronavirus 2, Bordetella parapertussis, Bordetella pertussis, Chlamydia pneumoniae, and Mycoplasma pneumoniae on the BioFire® Respiratory Panel 2.1 (RP2.1), BioFire® Respiratory Panel 2.1plus (RP2.1plus) and BioFire® Respiratory Panel 2.1-EZ (RP2.1-EZ) assay performed on the BioFire® FilmArray® systems. This product is not intended to replace manufacturer controls provided with the device.

PRODUCT SUMMARY and PRINCIPLE:
BioFire RP2.1/RP2.1plus Control Panel M441 is composed of 2 controls, BioFire RP2.1/RP2.1plus Positive and BioFire RP2.1/RP2.1plus Negative. BioFire RP2.1/RP2.1plus Positive contains surrogate control material composed of synthetic RNA transcripts corresponding to genome segments of pathogens listed in Table 1. BioFire RP2.1/RP2.1plus Negative contains no RNA.
Routine use of quality controls that are consistent lot to lot assists the laboratory in identifying shifts, trends, and increased frequency of random errors caused by variations in the test system, such as failing reagents. Early investigation can prevent failed assay runs.

COMPOSITION:
The BioFire RP2.1/RP2.1plus Control Panel M441 is comprised of 12 single use tubes, 6 tubes of BioFire RP2.1/RP2.1plus Positive and 6 tubes of BioFire RP2.1/RP2.1plus Negative, 300µL each. BioFire RP2.1/RP2.1plus Positive control contains synthetic RNA suspended in a non-infectious solution of buffers, preservatives and stabilizers. BioFire RP2.1/RP2.1plus Negative control contains buffers and preservatives. Tables 1 and 2 list the pathogens that are monitored by the BioFire RP2.1/RP2.1plus Control Panel M441.


INSTRUCTIONS FOR USE:

1. Allow control to be tested to come completely to room temperature (18°–25°C), approximately 30 minutes. 
2. Use the control as provided.  DO NOT DILUTE. 
3. Immediately before use, mix the control thoroughly by first inverting several times followed by vortexing the tube for 3-5 seconds. Tap the tube several times on the bench to remove any control caught in the cap before opening the tube. 
4. Prepare Sample Mix, invert at least 3 times and continue with the assay procedure according to manufacturer’s instructions. 
5. Discard control tube after use according to your local and federal regulations. 

PRECAUTIONS, WARNINGS and LIMITATIONS:

• Do not dilute. Use the control as provided. 
• This product is intended for in vitro analytical testing and is provided for Research Use only, not for use in diagnostic procedures. 
• This product does not contain the entire genome of the respiratory pathogens listed in Tables 1 and 2. 
• This product is not intended for use as a substitute for the internal controls provided with the device. 
• Appearance: Positive control is slightly cloudy and Negative control is clear.
• This product does not contain any biological material of human or animal origin.  Universal Precautions are NOT required when handling this product. 
• Quality control materials should be used in accordance with local, state, federal regulations and accreditation requirements. 
• BioFire RP2.1/RP2.1plus Control Panel M441 cannot be cloned, sold, or transferred without the explicit written consent of MMQCI.

STORAGE and STABILITY:
BioFire RP2.1/RP2.1plus Control Panel M441 should be stored frozen (-25°C to -15°C). Unopened BioFire RP2.1/RP2.1plus Control Panel M441 material is stable through the expiration date printed on the kit label when consistently stored frozen. BioFire RP2.1/RP2.1plus Positive and BioFire RP2.1/RP2.1plus Negative are for single use. Discard after use according to your local and federal regulations.

EXPECTED VALUES:
The expected results when the controls are analyzed are listed in Tables 1 and 2.

 

Table 1: BioFire RP2.1/RP2.1plus Positive Result Summary

Result Summary

Viruses

Detected

Adenovirus

Detected

Coronavirus 229E

Detected

Coronavirus HKU1

Detected

Coronavirus NL63

Detected

Coronavirus OC43

Detected

Middle East Respiratory Syndrome Coronavirus* (MERS-CoV)2

Detected

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2)

Detected

Human Metapneumovirus

Detected

Human Rhinovirus/ Enterovirus

Detected

Influenza A H1-20091

Detected

Influenza A H3

Detected

Influenza B

Detected

Parainfluenza Virus 13

Detected

Parainfluneza Virus 23

Detected

Parainfluenza Virus 33

Detected

Parainfluenza Virus 43

Detected

Respiratory Syncytial Virus

Bacteria

Detected

Bordetella parapertussis (IS1001)

Detected

Bordetella pertussis (ptxP)

Detected

Chlamydia pneumoniae

Detected

Mycoplasma pneumoniae

1 BioFire RP2.1/RP2.1plus Positive contains both Influenza A H1 and Influenza A H1-2009. Due to BioFire FilmArray 2.0 Software calling algorithm, only Influenza A H1-2009 will report as Detected, just as if a co-infection of Influenza A H1-2009 and another Influenza A H1 has occurred. To confirm successful detection of Influenza A H1, view the melt curve by following BioFire’s Technical Note: Torch Melting Curve Analysis with FilmArray 2.0 Software. For questions related to software, please contact BioFire Technical Support.

2 Middle East Respiratory Syndrome Coronavirus is reported on RP2.1plus assay only.

3 BioFire RP2.1-EZ software interprets each of the four assays for Parainfluenza viruses (PIV1, PIV2, PIV3 and PIV4) independently, however, the results are reported as a single test result for the virus.

Table 2: BioFire RP2.1/RP2.1plus Negative Result Summary

Result Summary

Viruses

Not Detected

Adenovirus

Not Detected

Coronavirus 229E

Not Detected

Coronavirus HKU1

Not Detected

Coronavirus NL63

Not Detected

Coronavirus OC43

Not Detected

Middle East Respiratory Syndrome Coronavirus* (MERS-CoV)1

Not Detected

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2)

Not Detected

Human Metapneumovirus

Not Detected

Human Rhinovirus/ Enterovirus

Not Detected

Influenza A

Not Detected

Influenza B

Not Detected

Parainfluenza Virus 12

Not Detected

Parainfluneza Virus 22

Not Detected

Parainfluenza Virus 32

Not Detected

Parainfluenza Virus 42

Not Detected

Respiratory Syncytial Virus

Bacteria

Not Detected

Bordetella parapertussis (IS1001)

Not Detected

Bordetella pertussis (ptxP)

Not Detected

Chlamydia pneumoniae

Not Detected

Mycoplasma pneumoniae

1 Middle East Respiratory Syndrome Coronavirus is reported on RP2.1plus only

2 BioFire RP2.1-EZ software interprets each of the four assays for Parainfluenza viruses (PIV1, PIV2, PIV3 and PIV4) independently, however, the results are reported as a single test result for the virus.

 

ORDERING INFORMATION:
Product Name: BioFire RP2.1/RP2.1plus Control Panel M441
Part Number: M441-OUS
Kit Contains: 12 tubes x 300µL
6 Positive controls and 6 Negative control

 

USAGE:
BioFire RP2.1/RP2.1plus Control Panel M441 est conçu en tant que test de Contrôle Qualité externe, positif et négatif, pour le suivi des performances des analyses in vitro d’acide nucléique en laboratoire pour la détection qualitative de Adenovirus, Coronavirus, Human Metapneumovirus, Human Rhinovirus/ Enterovirus, Influenza A, Influenza A subtype H1, Influenza A subtype H1-2009, Influenza A subtype H3, Influenza B, Middle East Respiratory Syndrome Coronavirus, Parainfluenza Virus, Respiratory Syncytial Virus, Severe Acute Respiratory Syndrome Coronavirus 2, Bordetella parapertussis, Bordetella pertussis, Chlamydia pneumoniae, et Mycoplasma pneumoniae avec les tests BioFire® Respiratory Panel 2.1 (RP2.1), BioFire® Respiratory Panel 2.1plus (RP2.1plus) et BioFire® Respiratory Panel 2.1-EZ (RP2.1-EZ) réalisés avec les sytèmes BioFire
FilmArray®. Le contrôle Positif de BioFire RP2.1/RP2.1plus est composé de transcrits d’ARN synthétiques spécifiquement développés pour les tests BioFire RP2.1, BioFire RP2.1plus et BioFire RP2.1-EZ et conçu pour être utilisé uniquement avec ces tests. Ce contrôle n’est pas conçu pour remplacer les contrôles du fabricant fournis avec l’instrument.

PRÉSENTATION ET PRINCIPE DU PRODUIT:
BioFire RP2.1/RP2.1plus Control Panel M441 est composé de 2 contrôles, BioFire RP2.1/RP2.1plus Positif and BioFire RP2.1/RP2.1plus Négatif. BioFire RP2.1/RP2.1plus Positif contient du matériel de contrôle de substitution composé de transcrits d’ARN synthétiques correspondant à des segments de génome des agents pathogènes listés dans la Table 1. BioFire RP2.1/RP2.1plus Négatif ne contient pas d’ARN.
Une utilisation routinière des matériels de référence, cohérente de lot à lot, permet aux laboratoires d’identifier les changements, les tendances et l’augmentation des erreurs aléatoires causées par les variations du système d’analyse comme des réactifs défectueux.
Une investigation précoce peut prévenir l’échec des analyses réalisées.

COMPOSITION:
BioFire RP2.1/RP2.1plus Control Panel M441 est composé de 12 tubes à usage unique, 6 tubes de BioFire RP2.1/RP2.1plus Positif et 6 tubes de BioFire RP2.1/RP2.1plus Négatif, de 300µL chacun. BioFire RP2.1/RP2.1plus Positif contient de l’ARN synthétique suspendu dans une solution non-infectieuse de tampons, conservateurs et stabilisants. BioFire RP2.1/RP2.1plus Négatif contient des tampons et conservateurs. Les Tables 1 et 2 listent les agents pathogènes détectés par le BioFire RP2.1/RP2.1plus Control Panel M441.

UTILISATION:
1. Placer le flacon à tester à température ambiante jusqu’à ce qu’il atteigne une température de 18oC à 25oC.
2. Utiliser le contrôle tel quel. NE PAS LE DILUER.
3. Juste avant l’analyse, bien mélanger le contrôle en inversant le tube plusieurs fois puis en le passant au vortex 3 à 5 secondes. Tapoter le tube à plusieurs reprises sur la paillasse afin d’éliminer tout excès de liquide présent dans le bouchon avant de l’ouvrir.
4. Préparer la cassette BioFire RP2.1 ou BioFire RP2.1plus ou BioFire RP2.1-EZ pour l’analyse. Utiliser le contrôle de façon identique à un échantillon de patient, selon les instructions du fabricant (voir BioFire RP2.1 ou BioFire RP2.1plus ou BioFire RP2.1- EZ Quick Guide ou Instructions for Use).
5. Jeter chaque bouteille après usage conformément aux réglementations locales et fédérales.

PRÉCAUTIONS, MISES EN GARDE ET RESTRICTIONS:
• Ne pas diluer. Utilisez le produit de contrôle tel quel.
• Ce produit est destiné uniquement aux analyses in vitro.
• Ce produit doit être uniquement utilisé avec BioFire RP2.1 ou BioFire RP2.1plus ou BioFire RP2.1-EZ sur les systèmes BioFire FilmArray. Il ne contient pas le génome complet des agents pathogènes respiratoires listés dans les Tables 1 et 2. Ce produit n’est pas compatible avec le test FilmArray Respiratory Panel (RP).
• Ce produit n’est pas conçu pour être utilisé en substitution des contrôles internes fournis avec le test BioFire RP2.1 ou BioFire RP2.1plus ou BioFire RP2.1-EZ.
• Aspect: Le contrôle Positif est légèrement trouble, le contrôle Négatif est transparent.
• Ce produit ne contient aucune matière biologique d’origine humaine ou animale. Le respect des précautions universelles n’est PAS nécessaire lors de la manipulation de ce produit.
• Les matériels de contrôle Qualité doivent être employés en accord avec les lois locales, d’Etat et fédérales ainsi que les exigences d’accréditation.
• BioFire RP2.1/RP2.1plus Control Panel M441 ne peut pas être cloné, vendu ou transféré sans le consentement écrit explicite de MMQCI.

CONSERVATION ET STABILITÉ:
BioFire RP2.1/RP2.1plus Control Panel M441 doit être stocké congelé (-25°C au -15°C). Les flacons non-ouverts de BioFire RP2.1/RP2.1plus Control Panel M441 sont stables jusqu’à leur date de péremption indiquée sur l’étiquette, sous réserve d’avoir été constamment maintenus à -20°C lors du stockage. Les flacons BioFire RP2.1/RP2.1plus Positif et BioFire RP2.1/RP2.1plus Négatif sont à usage unique. Jeter chaque bouteille après usage conformément aux réglementations locales et fédérales.

VALEURS ATTENDUES:
Les résultats attendus lors de l’analyse des contrôles sont listés dans les Tables 1 et 2.

Table 1: BioFire RP2.1/RP2.1plus Positive Result Summary

Result Summary

Viruses

Detected

Adenovirus

Detected

Coronavirus 229E

Detected

Coronavirus HKU1

Detected

Coronavirus NL63

Detected

Coronavirus OC43

Detected

Middle East Respiratory Syndrome Coronavirus* (MERS-CoV)2

Detected

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2)

Detected

Human Metapneumovirus

Detected

Human Rhinovirus/ Enterovirus

Detected

Influenza A H1-20091

Detected

Influenza A H3

Detected

Influenza B

Detected

Parainfluenza Virus 13

Detected

Parainfluneza Virus 23

Detected

Parainfluenza Virus 33

Detected

Parainfluenza Virus 43

Detected

Respiratory Syncytial Virus

Bacteria

Detected

Bordetella parapertussis (IS1001)

Detected

Bordetella pertussis (ptxP)

Detected

Chlamydia pneumoniae

Detected

Mycoplasma pneumoniae

1 BioFire RP2.1/RP2.1plus Positive contains both Influenza A H1 and Influenza A H1-2009. Due to BioFire FilmArray 2.0 Software calling algorithm, only Influenza A H1-2009 will report as Detected, just as if a co-infection of Influenza A H1-2009 and another Influenza A H1 has occurred. To confirm successful detection of Influenza A H1, view the melt curve by following BioFire’s Technical Note: Torch Melting Curve Analysis with FilmArray 2.0 Software. For questions related to software, please contact BioFire Technical Support.

2 Middle East Respiratory Syndrome Coronavirus is reported on RP2.1plus assay only.

3 BioFire RP2.1-EZ software interprets each of the four assays for Parainfluenza viruses (PIV1, PIV2, PIV3 and PIV4) independently, however, the results are reported as a single test result for the virus.

Table 2: BioFire RP2.1/RP2.1plus Negative Result Summary

Result Summary

Viruses

Not Detected

Adenovirus

Not Detected

Coronavirus 229E

Not Detected

Coronavirus HKU1

Not Detected

Coronavirus NL63

Not Detected

Coronavirus OC43

Not Detected

Middle East Respiratory Syndrome Coronavirus* (MERS-CoV)1

Not Detected

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2)

Not Detected

Human Metapneumovirus

Not Detected

Human Rhinovirus/ Enterovirus

Not Detected

Influenza A

Not Detected

Influenza B

Not Detected

Parainfluenza Virus 12

Not Detected

Parainfluneza Virus 22

Not Detected

Parainfluenza Virus 32

Not Detected

Parainfluenza Virus 42

Not Detected

Respiratory Syncytial Virus

Bacteria

Not Detected

Bordetella parapertussis (IS1001)

Not Detected

Bordetella pertussis (ptxP)

Not Detected

Chlamydia pneumoniae

Not Detected

Mycoplasma pneumoniae

1 Middle East Respiratory Syndrome Coronavirus is reported on RP2.1plus only

2 BioFire RP2.1-EZ software interprets each of the four assays for Parainfluenza viruses (PIV1, PIV2, PIV3 and PIV4) independently, however, the results are reported as a single test result for the virus.

MODALITES DE COMMANDE:
Nom du produit: BioFire RP2.1/RP2.1plus Control Panel M441
Reference du produit M441-OUS
Contenu du kit : 12 tubes x 300µL
6 contrôles Positifs et 6 contrôles Négatifs

 

View AllClose

2 Reviews

  • 5

    best price

    Posted by Caleb on 7th Jan 2022

    The Gentaur company has very favourable prices and the company response is very good.

  • 5

    BioFire RP2.1/RP2.1 plus Control Panel M441 (includes SARS-CoV-2)

    Posted by MMQC on 10th Jun 2021

    The BioFire RP2.1/RP2.1plus Control Panel M441 is intended for in vitro use as reference material to monitor the detection and identification of respiratory viral and bacterial targets in nasopharyngeal swabs (NPS) obtained from individuals suspected of respiratory tract infections.

View AllClose